Iron remover is a safety equipment used to prevent accidental iron from entering the working machinery (especially crushers) along with the materials or ore being processed. Therefore, iron remover can prevent accidents or forced stoppages due to the entry of iron objects during mechanical work. Iron remover is widely used. Now Huakang Electromechanical teaches you how to choose iron remover:

1. The correct selection of iron remover must also consider the iron content of the material, iron removal requirements, use environment and the characteristics of the iron remover itself.& nbsp;

2. When the material contains more iron, self-unloading electromagnetic and permanent magnet iron remover with continuous iron discharge ability should be used. (Wanda Industrial Single-layer Belt Machine, Multi-layer Belt Machine) 

3. When the material contains less iron, manual iron unloading electromagnetic and permanent magnet iron remover should be used. Properly reducing the suspension height will help remove iron.& nbsp;

4. When the material contains very few iron parts, a metal detector should be used in conjunction with a strong excitation self-dumping electromagnetic iron remover to save electricity, save energy, and have a good iron removal effect.&& nbsp;

5. When the power capacity is limited, permanent magnet iron remover (Wanda Industry Permanent Magnet WD Series Magnetic Separator, green and energy-saving) should be used.& nbsp;

6. When the dust in the environment is serious, iron remover with a fully enclosed structure should be used.

7. When the iron remover is installed on the head of the belt conveyor, the material has forward momentum and is loose to remove iron, but the driving wheel at the bottom of the iron remover should be made of non-ferromagnetic material.& nbsp;

8. For non-ferromagnetic metal materials that cannot be absorbed by iron remover, it is advisable to use a metal detector for detection and manually pick them out after alarm or shutdown.& nbsp;

9. The iron remover has the following characteristics: the large one is easy to absorb, the long one is easy to absorb, the short one is easy to absorb; the sharp one is easy to absorb, and the suction one is easy to be static. For occasions with high iron removal requirements, the specifications of iron remover should be appropriately improved or multi-level iron removal should be adopted. nbsp;

10. When multi-stage iron removal is used, the iron removal suction of the rear stage should be higher than that of the front stage. Otherwise, the iron removal effect of the rear stage iron remover will be poor.& nbsp;

11. There are many ways to remove iron from magnetic materials. If the situation is complex, we should cooperate with our company's technical department to make special designs according to the user's special use and special environment.

Weifang Huakang Electromechanical Technology Co., Ltd. is located at the northern foot of Yishan Mountain in Dongzhen, Linqu, known as the hometown of Qilu culture and the hometown of ornamental stones in China. It has convenient transportation and elegant environment. It is an enterprise integrating scientific research, production and sales. Main: mining equipment, magnetic separation equipment, conveying equipment, screening machinery, weighing ingredients, industrial automation and other mechanical products manufacturing and sales.